The MPJ24-Li is the 24 m platform class lithium electric telescopic boom lift in the Hontylift MPJ series. The published working height is 26.2 m, the platform height is 24.2 m, and the maximum working radius is 20 m. The machine is 2.49 m wide, 10.3 m long when stowed, and weighs about 14,800 kg. The platform is rated 300 kg or 450 kg depending on the configuration.
The MPJ24-Li is the first lithium model in the range. The 80 V / 460 Ah battery and 20 kW pump motor are the step up from the 48 V models, and the 20 m working radius is the longest in the 24 m class. The 450 kg platform load is the other reason to choose it over the 48 V group.
Why the MPJ24-Li exists
The 24 m platform class is where the 48 V models stop and the lithium models start. The MPJ24-Li exists for sites that need 26.2 m working height and 20 m working radius, with a 450 kg platform load and a battery package that can support a full shift. The lithium pack is the difference in charging and energy management, not just a label.
The 14,800 kg weight is the floor and transport number. The 10.3 m stowed length is the same as the MPJ20, but the machine is 5,700 kg heavier. Check the floor, the axle and the transport bed before the reach. The 4 × 2 drive and 45% gradeability are shared with the smaller models, so the surface conditions are still a constraint.
When the 24-Li is the wrong machine
Do not choose the 24-Li if the work face needs more than 26.2 m working height, more than 20 m working radius, or the 26-Li 21.5 m outreach. The 26-Li is the next step. The 24-Li is also the wrong choice if the route cannot take a 10.3 m stowed chassis or the floor cannot take 14,800 kg; it is 5,700 kg heavier than the MPJ20.
Key Specifications
| Item | Value |
|---|---|
| Max. working height | 26.2 m |
| Max. platform height | 24.2 m |
| Max. working radius | 20 m |
| Safe working load, platform | 300 / 450 kg |
| Overall width | 2.49 m |
| Machine weight | 14,800 kg |
Work-face planning
Working height is 26.2 m and platform height is 24.2 m, a 2.0 m difference. A work face at 23 m needs about 25 m of working height and leaves about 1.2 m of margin; a work face at 24.2 m is at the platform limit. The 20 m working radius is measured from the turntable.
The platform is rated 300 kg or 450 kg depending on the configuration. Confirm the final rating and the load chart at the required outreach. The 20 m radius is the reason to choose the 24-Li over the 48 V models; it is also the reason to check the chart before taking the full load to full reach.
Model comparison
The MPJ24-Li is the entry to the lithium group. The table shows the step from the MPJ20 and the jump to the MPJ26-Li.
| Model | Working height | Working radius | Platform load | Machine weight | Battery |
|---|---|---|---|---|---|
| MPJ20 | 21.6 m | 14.5 m | 300 kg | 9,100 kg | 48 V / 420 Ah |
| MPJ24-Li | 26.2 m | 20 m | 300 / 450 kg | 14,800 kg | 80 V / 460 Ah |
| MPJ26-Li | 28.8 m | 21.5 m | 300 / 450 kg | 16,100 kg | 80 V / 460 Ah |
Technical Specifications
| Item | Value |
|---|---|
| Model | MPJ24-Li |
| Max. working height | 26.2 m |
| Max. platform height | 24.2 m |
| Max. working radius | 20 m |
| Platform width | 0.90 m |
| Platform length | 2.40 m |
| Length, stowed | 10.30 m |
| Overall width | 2.49 m |
| Safe working load, platform | 300 / 450 kg |
| Drive | 4 × 2 |
| Machine weight | 14,800 kg |
| Battery | 80 V / 460 Ah |
| Standards | EN 280, GB/T 25852 |
Performance and power: Stowed height 2.92 m, wheelbase 3.20 m, ground clearance 0.30 m, platform rotation ±80°, turntable 360° continuous, travel speed 0–5.2 km/h, gradeability 45%, outside turning radius 6.5 m, control voltage 12 VDC, pump motor 20 kW and drive motor 5.2 kW.
Site fit and transport
The route check is 2.49 m width, 10.3 m stowed length and 14,800 kg weight. The outside turning radius is 6.5 m, the ground clearance is 0.30 m and the stowed gradeability is 45%. The 14,800 kg weight is the number that separates this model from the 48 V group; a floor or axle that accepts the MPJ20 may not accept the MPJ24-Li.
For transport, confirm the low-bed or container envelope against the 10.3 m stowed length and 2.49 m width. The 14,800 kg weight is the axle and floor check. Confirm the charging plan for the 80 V lithium pack at the destination site.
Transport and lifting plan
The 24-Li needs a bed that can take 10.3 m stowed and 14,800 kg. The lithium pack is shipped with a partial charge; confirm the transport classification and the charging plan at the destination before the machine leaves the factory.
Typical applications
Typical MPJ24-Li work includes high-rise curtain wall and glazing, steel structure, industrial plant maintenance, bridge and infrastructure inspection, airport and stadium work, and large signage. The 26.2 m working height and 20 m radius cover a work face that is both high and set back.
The 80 V lithium pack is the reason to choose the 24-Li over the 48 V models: it supports a full shift and a faster charging cycle. Confirm the charging plan at the destination before the machine is shipped.
Model selection
Choose the 24-Li when the work face is between 24 m and 26 m, the outreach is up to 20 m, and the platform load is 450 kg. It is the shorter, lighter lithium model: 10.3 m stowed and 14,800 kg, against 11.7 m and 16,100 kg for the 26-Li.
Do not choose the 24-Li if the work face needs 28.8 m working height or 21.5 m outreach; the 26-Li is the next step. Do not choose it if the site cannot charge an 80 V lithium pack.
The 24-Li is the better choice when the transport bed is limited to 10.3 m and the work face is within 26.2 m.
Project checklist
Start with the 26.2 m working height and the 20 m outreach. If the work face needs 28.8 m or 21.5 m, the 26-Li is the next step. Then check the 10.3 m stowed length and the 14,800 kg weight. Finally, confirm the 80 V charging point and the tyre specification for the site surface.
Site scenarios
High-rise facade, 25 m work face, 18 m setback. The 24-Li covers the height with 26.2 m working height and the setback with 20 m radius. The 10.3 m stowed chassis fits a standard low-bed.
Bridge inspection, 15 m horizontal reach. The 24-Li reaches the underside from the bridge deck without a second setup. The 450 kg platform carries the inspection tools.
Site with a 10.3 m transport bed and a 15 t floor limit. The 24-Li fits; the 26-Li is 1.4 m longer and 1,300 kg heavier, so confirm the bed and the floor before choosing the larger model.
Common specification mistakes
Three mistakes are common with the 24-Li. The first is to treat the 80 V lithium pack as a drop-in for the 48 V models; the charger and charging plan are different. The second is to assume the 20 m radius is available at 450 kg; confirm the load chart. The third is to book a 10 m transport bed without allowing for the 10.3 m stowed length. The 24-Li is the only 80 V model with a 10.3 m stowed chassis and a 20 m working radius. The 24-Li is the shorter lithium model at 10.3 m, 1.4 m shorter than the 26-Li.
Options and accessories
The 24-Li is quoted with the 80 V / 460 Ah lithium pack, the 20 kW pump and the 5.2 kW drive. The 10.3 m chassis is the same length as the MPJ20, so the transport plan is simpler than the 26-Li. Confirm the charger, the charging point and the platform accessories on the quotation.
Materials and main components
The 24-Li is built around a 20 m boom and a 10.3 m chassis. The platform is 0.90 × 2.40 m with ±80° rotation, the turntable turns 360° continuously, and the control panels are Bosch Rexroth. The 14,800 kg machine is 1,300 kg lighter than the 26-Li, which is the first thing to check on a suspended floor. Ask for the lithium pack and hydraulic component list with the quotation.
Certifications and standards
The 24-Li is published against EN 280 and GB/T 25852. CE / EN 280 / ISO 9001 documentation is supplied for the destination market. Confirm the current certificate number, issuer and scope with the quotation before relying on any certification statement on this page.
Factory testing and pre-delivery inspection
Before packing, the 24-Li is load-tested at 300 kg and 450 kg and exercised through the 20 m radius: boom extension and retraction, turntable and platform rotation, brakes, emergency stop and descent, hydraulic leaks, electrical safety, lithium battery condition, welds, guardrail and gate, and limit switches. The report is packed with the machine.
Delivery, packaging and installation
Because the 24-Li is 10.3 m stowed, the transport bed is the same length class as the MPJ20. A single unit is typically 15–25 working days; container orders 25–35 days. Export packing is a steel frame, moisture barrier and strapping, with a plywood case on request. The quotation states the Incoterm, port and payment terms.
Before dispatch, check the 10.3 m stowed length, 2.49 m width and 14,800 kg weight against the transport bed and the site route. Confirm the 80 V charging plan at the destination; a lithium machine without a charging plan is not ready for work.
Warranty and after-sales support
The 24-Li is covered for 36 months on the boom, chassis and platform, and for 12 months on the whole machine, including parts and labour on the hydraulic, electrical and drive systems. Wear parts and consumables are excluded. Claims are answered within one business day; Spare parts list and availability are confirmed with the quotation.
About Hontylift
The 24-Li is built in the Hontylift factory in Jinan, Shandong, China, alongside the 26-Li on the 80 V lithium line. It is aimed at high-rise facades, infrastructure and industrial maintenance. Every unit is load tested before packing.
Frequently Asked Questions
MPJ24-Li vs MPJ20 — which one?
Choose the MPJ20 when 21.6 m working height and 14.5 m working radius are enough. Choose the MPJ24-Li when the work face needs 26.2 m working height, 20 m working radius or the 450 kg platform load.
What is the maximum working radius?
The published maximum working radius is 20 m, measured from the turntable. Confirm the load chart at the required outreach on the quotation.
Is the platform load 300 kg or 450 kg?
The published rating is 300 kg / 450 kg depending on the configuration. Confirm the final rating and the load chart on the quotation.
What battery does it use?
The published battery is 80 V / 460 Ah lithium. Confirm the final pack, charger and charging plan on the quotation.
Will it fit a 2.5 m aisle?
The published width is 2.49 m, so a 2.5 m aisle leaves about 10 mm total clearance. Measure the narrowest point and confirm the route with the outline drawing.
Is it 4 × 2 or 4 × 4?
The published drive is 4 × 2. Confirm the final drive and tyre specification on the quotation for unsealed or sloping ground.
Does it have outriggers?
The published configuration does not list outriggers. The MPJ24-Li is a self-propelled telescopic boom lift; confirm any stabiliser requirement for your site on the quotation.
What is the warranty?
The 24-Li has 36 months of structural cover and 12 months of whole-machine cover. Wear parts and consumables are excluded; claims are answered within one business day.
Documents available on request
Datasheet, outline drawing, load chart, test report and certification documents are available on request. No download links are published until the current file set is confirmed.
Related models
MPJ26-Li 28.8 m telescopic boom lift — 28.8 m working height and 21.5 m working radius.
MPJ20 21.6 m telescopic boom lift — 21.6 m working height and 14.5 m working radius.
MPJ18 20.5 m telescopic boom lift — 20.5 m working height and 13.2 m working radius.
All telescopic boom lifts — Compare the MPJ range.
Manufacturer & support
This machine is designed, assembled and load-tested by Jinan Hontylift Machinery Co., Ltd. in Jinan, Shandong, China. Our team supports buyers, dealers and rental fleets with specification review, export packing, spare parts and after-sales advice.
- Manufacturer: Jinan Hontylift Machinery Co., Ltd.
- Address: Jinan Jibei Economic Development Zone, Shandong, China
- Certification: CE declaration and ISO 9001 quality system; test report supplied with each unit. Certificate number, issuer and scope confirmed with the quotation.
- Contact: Jonson@hontylift.com · +86-531-82637199
