The MPA16E is the 16 m class electric articulating boom lift in the Hontylift MPA series. The published working height is 16.58 m, the platform height is 14.58 m, and the maximum working radius is 8.45 m. The machine is 2.32 m wide, 6.85 m long when stowed, and weighs about 7,250 kg. The platform is rated 256 kg or 350 kg depending on the configuration; confirm the final rating on the quotation.
The MPA16E is built for work that needs up-and-over reach rather than a straight scissor lift. The articulating boom lets the platform reach over a wall, a machine or a facade detail, and the 8.45 m working radius covers a useful working envelope. The 2.32 m width and 6.85 m stowed length keep it manoeuvrable on compact sites.
Why the MPA16E exists
Most 16 m access problems are not solved by a taller scissor lift. A scissor lift goes up; an articulating boom goes up, out and over. The MPA16E exists for the work face that sits behind an obstruction, above a low roof, or beyond the reach of a vertical lift. The 16.58 m working height and 8.45 m working radius are the two numbers that define that envelope.
The 2.32 m width is the route number. It is wider than a compact scissor lift but narrower than a full-size 4x4 boom, and the 6.85 m stowed length keeps the machine within a normal site route. The 7,250 kg weight is the floor and transport number. If the route is tighter than 2.32 m or the floor cannot take 7,250 kg, the MPA16E is the wrong model, regardless of its reach.
Key Specifications
| Item | Value |
|---|---|
| Max. working height | 16.58 m |
| Max. platform height | 14.58 m |
| Max. working radius | 8.45 m |
| Safe working load, platform | 256 / 350 kg |
| Overall width | 2.32 m |
| Machine weight | 7,250 kg |
Work-face planning
Working height is 16.58 m and platform height is 14.58 m, a 2.0 m difference. A work face at 13.5 m needs about 15.5 m of working height and leaves about 1.0 m of margin; a work face at 14.5 m is at the platform limit. The 8.45 m working radius is measured from the turntable; the actual reach depends on the boom configuration and the load.
Plan the reach and the load together. The platform is rated 256 kg or 350 kg depending on the configuration, and the load includes people, tools and material. Do not use the working radius as a licence to overload the platform at full outreach; confirm the load chart with the quotation.
Model comparison
The MPA16E, MPA18E and MPA20E are often quoted together. The table separates the published numbers; the MPA20E page publishes only working height, load and weight, so the missing fields are marked confirm.
| Model | Working height | Working radius | Platform load | Machine weight | Width |
|---|---|---|---|---|---|
| MPA16E | 16.58 m | 8.45 m | 256 / 350 kg | 7,250 kg | 2.32 m |
| MPA18E | 18 m | 10 m | 256 / 350 kg | 8,100 kg | 2.32 m |
| MPA20E | 20 m | Confirm | 250 kg | 8,550 kg | Confirm |
Technical Specifications
| Item | Value |
|---|---|
| Model | MPA16E |
| Max. working height | 16.58 m |
| Max. platform height | 14.58 m |
| Max. working radius | 8.45 m |
| Platform width | 0.76 m |
| Platform length | 1.83 m |
| Height, stowed | 2.32 m |
| Length, stowed | 6.85 m |
| Overall width | 2.32 m |
| Wheelbase | 2.36 m |
| Ground clearance, centre | 0.30 m |
| Safe working load, platform | 256 / 350 kg |
| Platform rotation | ±80° |
| Turntable rotation | 355° |
| Travel speed, stowed | 0–5.2 km/h |
| Gradeability, stowed | 30% |
| Turning radius, outside | 4.7 m |
| Drive | 2 × 2 |
| Machine weight | 7,250 kg |
| Battery | 48 V / 300 Ah |
| Control voltage | 12 VDC |
| Pump motor | 7 kW |
| Drive motor | 2 × 3.3 kW |
| Standards | EN 280, GB/T 25849 |
Site fit and transport
The route check starts with 2.32 m width, 6.85 m stowed length and 7,250 kg weight. The outside turning radius is 4.7 m and the stowed gradeability is 30%. The ground clearance is 0.30 m, so check ramps, thresholds and site debris. The published drive is 2 × 2, not 4 × 4.
For transport, confirm the low-bed or container envelope against the 6.85 m stowed length and 2.32 m width. The 7,250 kg weight is the axle and floor check. A machine that reaches the work face but cannot reach the site is still the wrong machine.
Options and accessories
On the MPA16E, the practical options are solid non-marking tyres for finished floors, anti-extrusion protection around the platform, an air line to the platform for tools, and a lithium battery package for indoor or clean sites. The insulated bucket and eco hydraulic oil are quoted for electrical or environmentally sensitive work. Confirm the final option list, battery chemistry and charger on the quotation.
Materials and main components
The 16E boom is high-strength steel with an aluminium alloy platform. The published control panel is PG for the 16 m class, and the hydraulic package uses international cylinders, valves, hoses and fittings. Drag chains protect the boom cables, limit switches stop over-travel, and an emergency power unit can retract the boom if the main motor fails. Solid rubber tyres are standard. Check the component list on the quotation.
Certifications and standards
EN 280 and GB/T 25849 are the standards published for the MPA16E. The CE / EN 280 / ISO 9001 documentation set is supplied for the destination market. Confirm the current certificate number, issuer and scope with the quotation before relying on any certification statement on this page.
Factory testing and pre-delivery inspection
Each MPA16E is load tested at the rated platform load and checked for boom and turntable movement, brake holding, emergency stop, emergency descent, hydraulic leaks, electrical insulation, battery condition, weld quality, guardrail and gate operation, and limit-switch function. The test report is packed with the machine. A third-party witness can be arranged before shipment.
Delivery, packaging and installation
The MPA16E is built to order. A single unit usually ships in 15–25 working days; a container order takes 25–35 days. Export packing is a steel frame with a moisture barrier and strapping, and a plywood case can be quoted. The quotation states the Incoterm, port and payment terms.
Before dispatch, check the 2.32 m width, 6.85 m stowed length, 7,250 kg weight and the transport envelope. Confirm the unloading point and the site route.
Warranty and after-sales support
| Item | Cover | Note |
|---|---|---|
| Structural — chassis, boom, platform | 36 months | Welds and structural components |
| Whole machine — hydraulic, electrical, drive | 12 months | Parts and labour |
| Wear parts | Not covered | Tyres, fuses, bulbs |
| Consumables | Not covered | Hydraulic oil, filters |
| Extended warranty | On request | Terms confirmed with the quotation |
The MPA16E carries 36 months of structural cover and 12 months of whole-machine cover, including parts and labour on the hydraulic, electrical and drive systems. Tyres, fuses, bulbs, hydraulic oil and filters are excluded. Claims are answered within one business day. Spare parts list and availability are confirmed with the quotation.
About Hontylift
Hontylift is based in Jinan, Shandong, China, and builds the MPA series alongside its scissor lift range. The 16E is the compact entry to the articulated boom family, aimed at contractors and rental fleets that need up-and-over reach without a full-size 4×4 chassis. Every unit is load tested before packing.
Frequently Asked Questions
What is the difference between 16.58 m working height and 14.58 m platform height?
Working height adds about 2.0 m for the operator and handling space. The platform floor is 14.58 m; the working height is 16.58 m. Quote the measured work face against the platform height and keep the 2.0 m difference in mind.
Can the MPA16E reach over an obstacle?
Yes. The articulating boom is designed for up-and-over reach, and the published working radius is 8.45 m. The actual reach depends on the boom configuration and the load; confirm the load chart with the quotation.
Is the platform load 256 kg or 350 kg?
The published rating is 256 kg / 350 kg depending on the configuration. Confirm the final rating, the load chart and the platform configuration on the quotation.
Will it fit a 2.4 m aisle?
The published width is 2.32 m, so a 2.4 m aisle leaves about 80 mm total clearance. Measure the narrowest point, including door closers, racking and wall protection, and confirm the route with the outline drawing.
What drive and gradeability does it have?
The published drive is 2 × 2 and the stowed gradeability is 30%. Use it on firm, level ground and confirm the site slope against the operating manual.
What battery does it use?
The published battery is 48 V / 300 Ah with a 12 VDC control circuit. Confirm the final battery chemistry, charger and pack configuration on the quotation.
Does it have outriggers?
The published configuration does not list outriggers. The MPA16E is a self-propelled articulating boom lift; confirm any stabiliser or outrigger requirement for your site on the quotation.
What is the warranty?
The MPA16E has 36 months of structural cover and 12 months of whole-machine cover. Wear parts and consumables are excluded; claims are answered within one business day.
Documents available on request
Datasheet, outline drawing, load chart, test report and certification documents are available on request. No download links are published until the current file set is confirmed.
Related models
- MPA18E 18 m articulating boom lift — 18 m working height, 10 m working radius and 8,100 kg machine weight.
- MPA20E 20 m articulating boom lift — 20 m working height, 250 kg platform load and 8,550 kg machine weight.
- MPA22E 22 m articulating boom lift — 22 m working height, 4 × 4 drive and 9,000 kg machine weight.
- All articulating boom lifts — Compare the MPA range and the 18 m self-propelled model.
Manufacturer & support
This machine is designed, assembled and load-tested by Jinan Hontylift Machinery Co., Ltd. in Jinan, Shandong, China. Our team supports buyers, dealers and rental fleets with specification review, export packing, spare parts and after-sales advice.
- Manufacturer: Jinan Hontylift Machinery Co., Ltd.
- Address: Jinan Jibei Economic Development Zone, Shandong, China
- Certification: CE declaration and ISO 9001 quality system; test report supplied with each unit. Certificate number, issuer and scope confirmed with the quotation.
- Contact: Jonson@hontylift.com · +86-531-82637199
