The MPA22E is the 22 m class articulating boom lift in the Hontylift MPA series. The published working height is 22 m, the platform height is 20 m, and the maximum working radius is 8.45 m. The machine is 2.45 m wide, 8.9 m long when stowed, and weighs about 9,000 kg. The platform is rated 250 kg and the published drive is 4 × 4.
The MPA22E is the largest model in the published MPA range. It combines a 22 m working height with a 2.45 m width, a 45% stowed gradeability and a 6.0 km/h travel speed. The power row on the current page lists Kubota 36 kW while the page title says electric; the final power configuration must be confirmed with the quotation before the machine is specified.
Why the MPA22E exists
The 22 m work face is usually a facade, a steel structure, a large industrial hall or a public facility. The MPA22E exists for that class of work: 20 m platform height, 8.45 m working radius, 250 kg platform load and a 4 × 4 chassis with 45% gradeability. The 2.45 m width and 8.9 m stowed length are the route numbers, and the 9,000 kg weight is the floor and transport number.
The power configuration is the first thing to confirm. The published table lists Kubota 36 kW, which is an engine rating, while the page title says electric articulating boom lift. Do not order the machine on the assumption that it is battery-electric until the factory confirms the final power pack. The rest of the published data is usable for the route and work-face check.
Key Specifications
| Item | Value |
|---|---|
| Max. working height | 22 m |
| Max. platform height | 20 m |
| Max. working radius | 8.45 m |
| Safe working load, platform | 250 kg |
| Overall width | 2.45 m |
| Machine weight | 9,000 kg |
Work-face planning
Working height is 22 m and platform height is 20 m, a 2.0 m difference. A work face at 19 m needs about 21 m of working height and leaves about 1.0 m of margin; a work face at 20 m is at the platform limit. The 8.45 m working radius is measured from the turntable and defines the up-and-over envelope.
The 250 kg platform load includes people, tools and material. The 8.45 m working radius is not a licence to take the full load to full outreach; confirm the load chart with the quotation. The platform rotation is ±90°, which helps place the platform along a facade without repositioning the chassis.
Model comparison
The MPA22E is the top of the published MPA range. The table shows the step from the 18 m and 20 m models.
| Model | Working height | Working radius | Platform load | Machine weight | Width |
|---|---|---|---|---|---|
| MPA18E | 18 m | 10 m | 256 / 350 kg | 8,100 kg | 2.32 m |
| MPA20E | 20 m | Confirm | 250 kg | 8,550 kg | Confirm |
| MPA22E | 22 m | 8.45 m | 250 kg | 9,000 kg | 2.45 m |
Technical Specifications
| Item | Value |
|---|---|
| Model | MPA22E |
| Max. working height | 22 m |
| Max. platform height | 20 m |
| Max. working radius | 8.45 m |
| Platform width | 0.90 m |
| Platform length | 2.40 m |
| Height, stowed | 2.45 m |
| Length, stowed | 8.90 m |
| Overall width | 2.45 m |
| Wheelbase | 2.50 m |
| Ground clearance, centre | 0.33 m |
| Safe working load, platform | 250 kg |
| Platform rotation | ±90° |
| Turntable rotation | 355° |
| Travel speed, stowed | 0–6.0 km/h |
| Gradeability, stowed | 45% |
| Turning radius, outside | 5.4 m |
| Drive | 4 × 4 |
| Machine weight | 9,000 kg |
| Power | Kubota 36 kW (published; confirm the final power configuration) |
| Control voltage | 12 VDC |
| Pump motor | 13 kW |
| Drive motor | 4 × 9.0 kW |
| Standards | EN 280, GB/T 25852 |
Site fit and transport
The route check is 2.45 m width, 8.9 m stowed length and 9,000 kg weight. The outside turning radius is 5.4 m, the ground clearance is 0.33 m and the stowed gradeability is 45%. The 4 × 4 drive and 45% gradeability are the reason this model can work on unsealed or sloping ground that stops a 2 × 2 machine.
The 2.45 m width is 130 mm wider than the MPA18E, and the 8.9 m stowed length is 1.22 m longer. Check the door, aisle, ramp and transport bed against the MPA22E outline drawing, not the smaller model. The 9,000 kg weight needs a floor and axle check before the machine is scheduled.
Options and accessories
The MPA series options include solid non-marking tyres, anti-extrusion protection, an air supply to the platform, a lithium battery with generator, a lightweight aluminium alloy insulated bucket, and eco-friendly hydraulic oil. Confirm which options are available with the final power configuration before the order.
Materials and main components
The MPA22E uses a high-strength steel boom, an aluminium alloy platform, Bosch Rexroth control panels, international hydraulic components, drag chains, limit switches, an emergency power supply, sensors and a 4 × 4 drive. Confirm the final power pack and component list against the quotation.
Certifications and standards
EN 280 and GB/T 25852 are the published standards. Certification and test documents are supplied for the destination market. Confirm the current certificate number, issuer and scope with the quotation before relying on any certification statement on this page.
Factory testing and pre-delivery inspection
Factory testing covers rated-load and overload checks, boom and turntable functions, brakes, emergency stop, emergency descent, hydraulic leaks, electrical safety, battery or engine condition, weld inspection, guardrail and gate operation, and limit-switch function. The test report travels with the machine; confirm the MPA22E test schedule and power configuration on the quotation.
Delivery, packaging and installation
Lead time is 15–25 working days for a single unit and 25–35 days for container orders. Export packing includes a steel frame, moisture barrier and strapping; a plywood case is available on request. The quotation confirms the Incoterm, port and payment terms.
Before dispatch, check the 2.45 m width, 8.9 m stowed length, 9,000 kg weight and the transport envelope. Confirm the power configuration and the fuel or charging plan for the destination site.
Warranty and after-sales support
| Item | Cover | Note |
|---|---|---|
| Structural — chassis, boom, platform | 36 months | Welds and structural components |
| Whole machine — hydraulic, electrical, drive | 12 months | Parts and labour |
| Wear parts | Not covered | Tyres, fuses, bulbs |
| Consumables | Not covered | Hydraulic oil, filters |
| Extended warranty | On request | Terms confirmed with the quotation |
36 months structural and 12 months whole machine, including parts and labour on hydraulic, electrical and drive components. Wear parts and consumables are excluded. Claims are answered within one business day. Spare parts list and availability are confirmed with the quotation.
About Hontylift
Hontylift builds articulated boom lifts and scissor lifts in Jinan, Shandong, China. The MPA series is produced for contractors, rental fleets and facility teams that need up-and-over reach. Every unit is load tested before packing.
Frequently Asked Questions
Is the MPA22E electric or diesel?
The page title says electric, but the published power row lists Kubota 36 kW. Confirm the final power configuration with the quotation before you specify the machine.
MPA22E vs MPA20E — which one?
Choose the MPA20E when 20 m working height and 250 kg are enough and the 8,550 kg weight fits the route. Choose the MPA22E when the work face needs 22 m working height and the 4 × 4 drive.
What is the maximum working radius?
The published maximum working radius is 8.45 m, measured from the turntable. Confirm the load chart at the required outreach on the quotation.
What is the gradeability?
The published stowed gradeability is 45%, with a 4 × 4 drive. Confirm the site slope and surface against the operating manual.
Does it have 4 × 4?
Yes, the published drive is 4 × 4. Confirm the final tyre specification and drive configuration on the quotation.
What is the machine weight?
The published machine weight is 9,000 kg. Confirm the final weight against the outline drawing and the transport plan.
Does it have outriggers?
The published configuration does not list outriggers. The MPA22E is a self-propelled articulating boom lift; confirm any stabiliser requirement for your site on the quotation.
What is the warranty?
36 months structural and 12 months whole machine. Wear parts and consumables are excluded; claims are answered within one business day.
Documents available on request
Datasheet, outline drawing, load chart, test report and certification documents are available on request. No download links are published until the current file set is confirmed.
Related models
- MPA20E 20 m articulating boom lift — 20 m working height, 250 kg platform load and 8,550 kg machine weight.
- MPA18E 18 m articulating boom lift — 18 m working height and the published 10 m working radius.
- MPA16E 16 m articulating boom lift — 16.58 m working height and 8.45 m working radius in a shorter chassis.
- All articulating boom lifts — Compare the MPA range and the 18 m self-propelled model.
Manufacturer & support
This machine is designed, assembled and load-tested by Jinan Hontylift Machinery Co., Ltd. in Jinan, Shandong, China. Our team supports buyers, dealers and rental fleets with specification review, export packing, spare parts and after-sales advice.
- Manufacturer: Jinan Hontylift Machinery Co., Ltd.
- Address: Jinan Jibei Economic Development Zone, Shandong, China
- Certification: CE declaration and ISO 9001 quality system; test report supplied with each unit. Certificate number, issuer and scope confirmed with the quotation.
- Contact: Jonson@hontylift.com · +86-531-82637199
