The GTJZ-0810-Z is the 8 m machine for a 900 mm aisle. Its body is 840 mm (33.1 in) wide, its platform is 2,270 × 810 mm, and it weighs about 2,050 kg (4,519 lb). The platform load is 320 kg (705 lb). The machine exists because a full-width 1,160 mm 8 m lift is the wrong purchase when the route is the constraint.
The working height is 9.8 m (32.2 ft) and the platform height is 7.8 m (25.6 ft). The 900 mm extension deck carries 113 kg. The 320 kg platform load is lower than the 0810’s 450 kg, so the trade-off is explicit: narrow body and lighter machine, less load margin.
Why the GTJZ-0810-Z exists
The 0810-Z is not a detuned 0810. It is a different route solution. An 840 mm body can pass a 900 mm aisle with about 60 mm total clearance, while a 1,160 mm machine cannot enter at all. If the work face is 7.8 m and the aisle is 900 mm, the 0810-Z is the only 8 m model in the family that fits.
The 320 kg platform load is enough for one worker with tools, or two workers with a light tool load, but it is not a material platform. The 2,050 kg machine weight is also easier on floors and goods lifts than the 2,250 kg 0810. The purchase reason is access, not capacity.
Key Specifications
| Item | Value |
|---|---|
| Max. platform height | 7.8 m (25.6 ft) |
| Max. working height | 9.8 m (32.2 ft) |
| Safe working load, platform | 320 kg (705 lb) |
| Safe working load, extension deck | 113 kg (249 lb) |
| Platform size (L × W) | 2,270 × 810 mm (89.4 × 31.9 in) |
| Overall width | 840 mm (33.1 in) |
| Platform extension length | 900 mm (35.4 in) |
| Machine weight | 2,050 kg (4,519 lb) |
| Travel speed, stowed | 3.5 km/h (2.2 mph) |
| Battery | 4 × 6 V / 200 Ah (24 V, 200 Ah) |
Work-face planning
Platform height is 7.8 m and working height is 9.8 m. A work face at 7.0 m needs about 9.0 m and leaves about 0.8 m of margin; an 8.0 m work face needs about 10.0 m and is outside the model. The 320 kg load must include people, tools and material, with the extension deck limited to 113 kg.
Measure the aisle at its narrowest point, not at the widest bay. Door closers, racking uprights, wall protection and floor markings all reduce the effective width. The 840 mm body is the starting point, not the whole route check.
Model comparison
The 0810-Z is the narrow 8 m option. The table shows what changes when the aisle opens to 1,160 mm or the work face drops to 6 m.
| Model | Width | Platform | Load | Weight | Best for |
|---|---|---|---|---|---|
| GTJZ-0810-Z | 840 mm (33.1 in) | 7.8 m (25.6 ft) | 320 kg (705 lb) | 2,050 kg (4,519 lb) | 900 mm aisles and 8 m work |
| GTJZ-0810 | 1,160 mm (45.7 in) | 7.8 m (25.6 ft) | 450 kg (992 lb) | 2,250 kg (4,960 lb) | Full-width 8 m work with more load |
| GTJZ-0608-M | 780 mm (30.7 in) | 5.8 m (19.0 ft) | 230 kg (507 lb) | 1,200 kg (2,646 lb) | 800 mm doors and compact 6 m work |
Technical Specifications
| Parameter | Value | Unit and condition | Notes |
|---|---|---|---|
| Model | |||
| Model | GTJZ-0810-Z | self-propelled hydraulic drive | narrow-body variant |
| Safe working load, platform | 320 kg (705 lb) | total of people, tools and material | one limit for the whole deck |
| Safe working load, extension deck | 113 kg (249 lb) | extension deck limit | applies whenever the deck is extended |
| Max. platform height | 7.8 m (25.6 ft) | platform raised, rated load | deck floor to ground |
| Max. working height | 9.8 m (32.2 ft) | platform raised, rated load | platform height plus operator space |
| Platform size (L × W) | 2,270 × 810 mm (89.4 × 31.9 in) | deck, retracted | extension adds 900 mm |
| Overall length | 2,390 mm (94.1 in) | machine, stowed | check against door and container openings |
| Overall height, guardrail folded | 1,820 mm (71.7 in) | transport and doorway height | use this figure for access checks |
| Minimum ground clearance | 106 mm / 29 mm (4.2 / 1.1 in) | centre / chassis | check ramps and thresholds |
| Wheelbase | 1,865 mm (73.4 in) | axle centre to axle centre | turning circle follows the wheelbase |
| Turning radius (inner / outer) | 2.3 m / 2.5 m (7.5 / 8.2 ft) | wheel path | check aisle width before the order |
| Machine weight | 2,050 kg (4,519 lb) | standard build | check floor and lifting loads |
| Lifting/descending speed | 3–5 m/min | at rated load | full lift takes 1.6–2.6 min, calculated |
| Travel speed, stowed | 3.5 km/h (2.2 mph) | firm level surface | platform stowed |
| Travel speed, platform raised | 0.8 km/h (0.5 mph) | firm level surface only | never lift or lower on a slope |
| Gradeability | 25% | firm dry surface, rated load | steeper ground is outside the rating |
| Drive configuration | 4 × 2 | four wheels, two driven | two driven wheels |
| Battery | 4 × 6 V / 200 Ah (24 V, 200 Ah) | battery pack | Tianneng |
| Charger | 24 V / 30 A | automatic cut-off | Sameite SMCZ1 or Tianneng |
| Tyres | Φ381 × 127 mm, non-marking | sealed and coated floors | Juneng or Zhefa |
Site fit and transport
The 840 mm body and 2,050 kg weight are the two route numbers. A 900 mm aisle leaves about 60 mm total clearance, so the route needs a clean line and a measured narrowest point. The 2,270 × 810 mm platform is narrower than the 0810’s, which suits single-file work and lighter tool loads.
The 0810-Z is a good fit for narrow warehouse aisles, retail back-of-house, plant rooms, lift lobbies and fit-out routes where an 8 m platform is needed but a 1,160 mm machine cannot pass. It is not the right choice for 450 kg material loads or a work face above 9.8 m.
Options and accessories
The 900 mm extension deck and non-marking tyres are the practical options. Alternative batteries, chargers and tyre compounds can be quoted. Keep the 840 mm body and 2,050 kg weight as the route constraints; a different component package may change the quotation and the documentation.
Materials and main components
The narrow chassis uses the family guardrail, checkered platform plate and oil-free link pins, packaged around a shorter axle and a narrower platform. The component list should be checked against the quotation if the machine is going into a clean room, a retail floor or a goods lift with a tight weight limit.
Certifications and standards
The 0810-Z is presented with the family CE / EN 280 / ISO 9001 documentation set. Certification and test documents are supplied for the destination market. Confirm the current certificate number, issuer and scope with the quotation before relying on any certification statement on this page.
Factory testing and pre-delivery inspection
Factory testing covers overload, brakes, emergency stop, emergency descent, hydraulic leaks, electrical safety, battery condition, weld inspection and guardrail/gate operation. The test report travels with the machine; a third-party witness can be arranged on request.
Delivery, packaging and installation
Lead time is 15–25 working days for a single unit and 25–35 days for container orders. Export packing includes a steel frame, moisture barrier and strapping; a plywood case is available on request. The quotation confirms the Incoterm, port and payment terms.
Before dispatch, check the 840 mm body, the 2,050 kg weight and the folded envelope against the 900 mm aisle. Confirm the goods-lift capacity and the unloading point. A route that clears the 0810-Z may still be too tight for the 0810, so keep the model-specific route check with the order.
Warranty and after-sales support
| Item | Cover | Note |
|---|---|---|
| Structural — chassis, scissor stack, platform | 36 months | Welds and structural components |
| Whole machine — hydraulic, electrical, drive | 12 months | Parts and labour |
| Wear parts | Not covered | Tyres, fuses, bulbs |
| Consumables | Not covered | Hydraulic oil, filters |
| Extended warranty | On request | Terms confirmed with the quotation |
36 months structural and 12 months whole machine, including parts and labour on hydraulic, electrical and drive components. Wear parts and consumables are excluded. Claims are answered within one business day. Spare parts list and availability are confirmed with the quotation.
About Hontylift
Hontylift builds the 0810-Z for narrow-aisle work in warehouses, retail and building services. The narrow 8 m line is produced alongside the full-width 0810 in Jinan and uses the same family control and service architecture. Every unit is load tested before packing.
Frequently Asked Questions
Will it fit a 900 mm aisle?
The body is 840 mm, so a 900 mm aisle leaves about 60 mm total clearance. Measure the narrowest point, including racking, door closers and wall protection, and confirm the route with the outline drawing.
Why only 320 kg?
The narrow 840 mm chassis and 2,050 kg machine weight are the route solution. The 320 kg platform load is the trade-off; it suits one worker with tools or two workers with a light tool load.
0810-Z vs 0810 — which one?
Choose the 0810-Z for a 900 mm aisle and 320 kg is enough. Choose the 0810 when the aisle is at least 1,160 mm and the 450 kg platform load is useful.
What floor load does it need?
The machine weighs about 2,050 kg. Request wheel-load data for a suspended slab, mezzanine or goods lift; the average footprint figure is not a point load.
Can I use the extension deck?
The 900 mm extension deck carries 113 kg and can be deployed, but the combined platform load must stay within 320 kg. Confirm the load plan on the quotation.
How fast does it travel?
3.5 km/h stowed and 0.8 km/h raised, on a firm level surface. Lower the platform before longer moves.
What battery and charger does it use?
The locked family data is 24 V 200 Ah with a 30 A charger. Confirm the final configuration on the quotation.
What is the warranty?
36 months structural and 12 months whole machine. Wear parts and consumables are excluded; claims are answered within one business day.
Documents available on request
- Specification sheet (PDF): request the full GTJZ-0810-Z parameter table for your tender documents.
- 2D outline drawing: overall dimensions for door, lift and layout checks.
- 3D model: layout and clash checks in your building model.
- CE declaration of conformity: the document supplied with each unit.
- Operation and maintenance manual: daily checks and service intervals.
- Spare parts list: part numbers for your stores.
Related models
- GTJZ-0810 full-width 8 m — 450 kg and 1,160 mm width when the aisle opens up.
- GTJZ-0608-M compact 6 m — 780 mm body for 800 mm doors and lower work faces.
- GTJZ-1214 12 m — The next height step on a 1,160 mm body.
- GTJZ-1416 14 m — A 1,400 mm wide-body machine for higher work.
- GTJZD-0608 legacy 6 m — The legacy 6 m page; confirm the SKU relationship before comparing.
Manufacturer & support
This machine is designed, assembled and load-tested by Jinan Hontylift Machinery Co., Ltd. in Jinan, Shandong, China. Our team supports buyers, dealers and rental fleets with specification review, export packing, spare parts and after-sales advice.
- Manufacturer: Jinan Hontylift Machinery Co., Ltd.
- Address: Jinan Jibei Economic Development Zone, Shandong, China
- Certification: CE declaration and ISO 9001 quality system; test report supplied with each unit. Certificate number, issuer and scope confirmed with the quotation.
- Contact: Jonson@hontylift.com · +86-531-82637199
