The GTJZ-1416 is the first 14 m model in the family that moves to a 1,400 mm (55.1 in) wide-body chassis. The platform height is 13.8 m (45.3 ft), the working height is 15.8 m (51.8 ft), and the platform load is 230 kg (507 lb). The machine weighs about 3,300 kg (7,275 lb) and uses a 2,630 × 1,130 mm platform with a 900 mm extension deck rated 113 kg.
The 1416 is not a scaled 1214. It is a wider, heavier machine with a different route requirement and no outriggers in the published configuration. That makes it a different purchase decision: more height and a wider working platform, but a 1,400 mm route and a 230 kg load limit.
Why the GTJZ-1416 exists
The 14 m work face is often the point where a 1,160 mm 12 m machine is no longer tall enough, but the building still has a 1,400 mm route. The 1416 exists for that step. It gives 13.8 m platform height and 15.8 m working height without the outrigger setup of the 1618, and it keeps a 2,630 × 1,130 mm platform for two-person tasks with light tools.
The 230 kg platform load is the constraint. It suits two workers with hand tools, but not a heavy material load. The 1,400 mm body and 3,300 kg weight are the route and floor constraints. If the work face needs 320 kg or 15.8 m platform height, the 1618 is the next model, and the outrigger conversation starts there.
What changes at 14 m
The 1416 is often compared with the 1214 as if it were the same machine with a taller stack. It is not. The 1416 moves to a 1,400 mm body, a 2,630 × 1,130 mm platform and a 3,300 kg machine weight. Those changes are the reason it can offer 13.8 m platform height without outriggers, and they are also the reason a 1,160 mm aisle is no longer enough.
If the route is 1,160 mm, the 1214 is the correct comparison. If the route is 1,400 mm and the work face is 13.8 m, the 1416 is the simpler setup than the outrigger-based 1618. The decision is route first, height second.
When the 1416 is the wrong machine
Do not choose the 1416 if the route is 1,160 mm, if the task needs a 320 kg platform load, or if the work face is above 15.8 m working height. The 1214 covers 11.8 m on a 1,160 mm body, and the 1618 covers 15.8 m with manual outriggers. The 1416 is also the wrong choice if the floor cannot take a 3,300 kg machine or the door is exactly 1,400 mm with no clearance for the operator and protection.
Key Specifications
| Item | Value |
|---|---|
| Max. platform height | 13.8 m (45.3 ft) |
| Max. working height | 15.8 m (51.8 ft) |
| Safe working load, platform | 230 kg (507 lb) |
| Safe working load, extension deck | 113 kg (249 lb) |
| Platform size (L × W) | 2,630 × 1,130 mm (103.5 × 44.5 in) |
| Overall width | 1,400 mm with the guardrail unfolded; 1,400 mm folded (source values) |
| Platform extension length | 900 mm (35.4 in) |
| Machine weight | About 3,300 kg (7,275 lb) |
| Travel speed, stowed | 2.5 km/h (1.6 mph) |
| Battery | 4 × 6 V / 240 Ah (source string; pack wiring and voltage to be confirmed) |
Work-face planning
Platform height is 13.8 m and working height is 15.8 m, a 2.0 m difference. A work face at 13.0 m needs about 15.0 m of working height and leaves about 0.8 m of margin. A work face at 14.0 m would need about 16.0 m and is outside the 1416.
The 230 kg platform load includes people, tools and material. The 900 mm extension deck carries 113 kg. If the task needs a heavy tool, a pump or a material stack, the load plan must be checked before the model is chosen; the 1416 is a two-person access machine, not a material platform.
Model comparison
The 1416 is the wide-body start. The table shows the step from the 1,160 mm 1214 to the outrigger-based 1618.
| Model | Width | Platform | Load | Weight | Best for |
|---|---|---|---|---|---|
| GTJZ-1214 | 1,160 mm (45.7 in) | 11.8 m (38.7 ft) | 320 kg (705 lb) | 2,950 kg (6,504 lb) | 12 m work on a 1,160 mm aisle |
| GTJZ-1416 | 1,400 mm (55.1 in) | 13.8 m (45.3 ft) | 230 kg (507 lb) | 3,300 kg (7,275 lb) | 14 m work with no outriggers, 1,400 mm route |
| GTJZ-1618 | 1,420 mm (55.9 in) | 15.8 m (51.8 ft) | 320 kg (705 lb) | 4,700 kg (10,362 lb) | 16 m work with manual outriggers |
Technical Specifications
| Parameter | Value | Unit and condition | Notes |
|---|---|---|---|
| Model | |||
| Model | GTJZ-1416 | self-propelled hydraulic drive | source table and Chinese table: GTJZ-1416 |
| Safe working load, platform | 230 kg (507 lb) | total of people, tools and material | one limit for the whole deck |
| Safe working load, extension deck | 113 kg (249 lb) | extension deck limit | applies whenever the deck is extended |
| Max. platform height | 13.8 m (45.3 ft) | platform raised, rated load | deck floor to ground |
| Max. working height | 15.8 m (51.8 ft) | platform raised, rated load | 2.0 m above platform height in the source |
| Platform size (L × W) | 2,630 × 1,130 mm (103.5 × 44.5 in) | deck, retracted | extension adds 900 mm |
| Overall length | 2,790 mm (109.8 in) | machine, stowed | check against door and container openings |
| Overall width, guardrail not folded | 1,400 mm (55.1 in) | source value | use for a conservative route check |
| Overall width, guardrail folded | 1,400 mm (55.1 in) | source value | no narrower folded width is given; confirm against the outline drawing |
| Overall height, guardrail folded | 2,060 mm (81.1 in) | transport and doorway height | use this figure for access checks |
| Minimum ground clearance | 106 mm / 29 mm (4.2 / 1.1 in) | centre / chassis | check ramps and thresholds |
| Wheelbase | 2,230 mm (87.8 in) | axle centre to axle centre | turning radius follows the wheelbase |
| Turning radius (inner / outer) | 2.3 m / 3.0 m (7.5 / 9.8 ft) | wheel path | 2.3 m inner radius; check aisle width |
| Lifting/descending speed | 3–5 m/min | at rated load | full lift takes 2.8–4.6 min, calculated |
| Travel speed, stowed | 2.5 km/h (1.6 mph) | firm level surface | platform stowed |
| Travel speed, platform raised | 0.8 km/h (0.5 mph) | firm level surface only | never lift or lower on a slope |
| Gradeability | 25% | firm dry surface, rated load | steeper ground is outside the rating |
| Drive configuration | 4 × 2 | four wheels, two driven | no outriggers in the source configuration |
| Battery | 4 × 6 V / 240 Ah | four 6 V batteries in the source | pack wiring and voltage to be confirmed |
| Charger | 24 V / 30 A | mains charger | charge time depends on the final pack configuration |
| Machine weight | About 3,300 kg (7,275 lb) | standard build, approximate | confirm with the quotation and outline drawing |
| Tyres | Φ381 × 127 mm, non-marking | sealed and coated floors | Juneng / Zhefa |
Configuration note: the 900 mm extension deck and 4 × 2 drive are retained from the current published configuration; confirm both with the quotation.
Site fit and transport
The 1,400 mm body is the route check. A 1,400 mm door is a tight fit; measure the narrowest point, the door closers and the floor protection. The 3,300 kg weight is the floor and goods-lift check. The 2,630 × 1,130 mm platform is larger than the 1214’s and gives two workers more room, but the 230 kg load limit still applies.
The 1416 is a good fit for high-level MEP, ceiling and facade work, warehouse roofs and plant rooms where the route is 1,400 mm and the work face is 13.8 m platform height. It is not the right choice for a 1,160 mm aisle, a 320 kg material load or a work face above 15.8 m working height.
Options and accessories
The 900 mm extension deck and 4 × 2 drive are retained from the current published configuration; confirm both with the quotation. Alternative battery, charger and tyre configurations can be quoted, but the 1,400 mm body and 230 kg platform load are the fixed points to preserve.
Materials and main components
The 1416 uses the family scissor stack, checkered platform plate, folding guardrail and oil-free link pins. The wide-body chassis carries a larger platform and a heavier stack than the 1214, so the component list and the floor check should be matched to the quotation. No outriggers are included in the published configuration.
Certifications and standards
The 1416 is presented with the family CE / EN 280 / ISO 9001 documentation set. Certification and test documents are supplied for the destination market. Confirm the current certificate number, issuer and scope with the quotation before relying on any certification statement on this page.
Factory testing and pre-delivery inspection
Factory testing covers overload, brakes, emergency stop, emergency descent, hydraulic leaks, electrical safety, battery condition, weld inspection and guardrail/gate operation. The test report travels with the machine; a third-party witness can be arranged on request.
Delivery, packaging and installation
Lead time is 15–25 working days for a single unit and 25–35 days for container orders. Export packing includes a steel frame, moisture barrier and strapping; a plywood case is available on request. The quotation confirms the Incoterm, port and payment terms.
Before dispatch, check the 1,400 mm body, the 3,300 kg weight and the folded envelope against the route. Confirm the goods-lift capacity and the unloading point. The 1416 is a wide-body machine; a route that clears the 1214 is not automatically a route for this model.
Warranty and after-sales support
| Item | Cover | Note |
|---|---|---|
| Structural — chassis, scissor stack, platform | 36 months | Welds and structural components |
| Whole machine — hydraulic, electrical, drive | 12 months | Parts and labour |
| Wear parts | Not covered | Tyres, fuses, bulbs |
| Consumables | Not covered | Hydraulic oil, filters |
| Extended warranty | On request | Terms confirmed with the quotation |
36 months structural and 12 months whole machine, including parts and labour on hydraulic, electrical and drive components. Wear parts and consumables are excluded. Claims are answered within one business day. Spare parts list and availability are confirmed with the quotation.
About Hontylift
Hontylift builds the 1416 for the 14 m work face where a wide-body route is available and outriggers are not part of the configuration. The 14 m line is produced in Jinan with the same family control and service architecture as the 12 m and 16 m models. Every unit is load tested before packing.
Frequently Asked Questions
1416 vs 1214 — which one?
Choose the 1214 when the aisle is 1,160 mm and 11.8 m platform height is enough. Choose the 1416 when the work face needs 13.8 m platform height and the route can take 1,400 mm.
Does it have outriggers?
No. The 1416 is a self-propelled scissor lift without outriggers in the published configuration. Use it on firm, level ground and check the floor loading.
What door width does it need?
The body is 1,400 mm. A 1,400 mm door is a tight fit; measure the narrowest point and confirm the route with the outline drawing.
What is the platform load?
230 kg, including people, tools and material. The 900 mm extension deck carries 113 kg. Confirm the load plan on the quotation.
How fast does it travel?
2.5 km/h stowed and 0.8 km/h raised, on a firm level surface. Lower the platform before longer moves.
What battery and charger does it use?
The locked family data is 24 V 240 Ah with a 30 A charger. Confirm the final pack wiring and charger on the quotation.
What floor load does it need?
The machine weighs about 3,300 kg. Request wheel-load data for a suspended slab, mezzanine or goods lift; the average footprint figure is not a point load.
What is the warranty?
36 months structural and 12 months whole machine. Wear parts and consumables are excluded; claims are answered within one business day.
Documents available on request
- Specification sheet (PDF): request the full GTJZ-1416 parameter table for your tender documents.
- 2D outline drawing: overall dimensions for door, lift and layout checks.
- 3D model: layout and clash checks in your building model.
- Battery pack wiring diagram: final series/parallel configuration confirmed with the quotation.
- CE declaration of conformity: the document supplied with each unit.
- Operation and maintenance manual: daily checks and service intervals.
- Spare parts list: part numbers for your stores.
Related models
- GTJZ-1214 12 m — 1,160 mm body and 11.8 m platform for narrower routes.
- GTJZ-1618 16 m — 15.8 m platform, 320 kg and manual outriggers.
- GTJZ-0810 full-width 8 m — 450 kg and 1,160 mm width for lower work.
- GTJZ-0608-M compact 6 m — 780 mm body for 800 mm doors.
- GTJZ-0810-Z narrow 8 m — 840 mm body for 900 mm aisles.
Manufacturer & support
This machine is designed, assembled and load-tested by Jinan Hontylift Machinery Co., Ltd. in Jinan, Shandong, China. Our team supports buyers, dealers and rental fleets with specification review, export packing, spare parts and after-sales advice.
- Manufacturer: Jinan Hontylift Machinery Co., Ltd.
- Address: Jinan Jibei Economic Development Zone, Shandong, China
- Certification: CE declaration and ISO 9001 quality system; test report supplied with each unit. Certificate number, issuer and scope confirmed with the quotation.
- Contact: Jonson@hontylift.com · +86-531-82637199
