Shipping Scissor Lifts with Lithium Batteries: UN38.3
Four documents decide whether your scissor lift sails. Which UN number applies, what the 30% state-of-charge rule really covers, and what to send the forwarder.
en
Practical news and buying guides for scissor lift and aerial work platform buyers, written by the Hontylift engineering team. Coverage includes CE and ANSI compliance, lithium and lead-acid battery decisions, container loading and shipping, pre-delivery inspection, spare parts and annual servicing. Every guide gives numbers you can check — dB limits, battery cycle figures, container fill counts, inspection checklists — not marketing copy. New articles are published monthly.
Four documents decide whether your scissor lift sails. Which UN number applies, what the 30% state-of-charge rule really covers, and what to send the forwarder.
At −15°C a scissor lift has three problems, and only one of them is the battery. Oil viscosity, charge temperature and seal hardening, with a routine by temperature band.
The average floor pressure of a 10 m scissor lift is 9.0 kN/m2. That is not the number your structural engineer needs. Here is the calculation, and what to send them.
When a scissor lift refuses to drive, it is usually protecting the operator. Three interlocks, the order they trigger in, and a three-minute field test.
Five measurements in a fixed order, with the voltage and specific gravity figures to compare against. Replacing the pack is the most expensive way to fix a charger.
Three drift signatures, one hold test, and the figures that separate normal creep from a fault that should take the machine out of service.
The parts that stop a scissor lift are cheap. The delay is what costs. What to stock for the first two years, what not to stock, and why the parts book matters.
"Quiet" means nothing in a tender until it has a number and a measuring position. Noise, dust and access rules for hospitals, data halls and occupied retail.
A rental buyer and an end user read the same datasheet and ask different questions. Five items that decide a fleet order, and what to change in the spec.
Scissor lift rental cost in Los Angeles runs $1,195 to $2,250 for 15 days. What a new Genie GS-2632, JLG ES2632 or GTJZ-0810 costs, and where the math turns.